Каталог
Сканування дрібних предметів
- High Sensitivity Waste Monitor for Small Items
- Efficient, Accurate Analysis
- Touchscreen Operation
- Cost Effective
The TSA BM185 is designed to scan small items (less than 1 ft.3) for radioactive emissions and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the TSA BM185 waste monitor allows for efficient and cost effective waste management.
Advanced Design Features
The TSA BM185 provides 4pi geometry and efficiency of greater than 45% for 60Co for effective and accurate screening of all sides of the item. The monitor’s high sensitivity and uniform measurement is achieved by using large surface area plastic scintillator detectors on all six sides of the counting chamber. With lead shielding on all sides, the BM185 provides higher sensitivity and isolates the scanned item from any external radiation influence. Designed for minimal maintenance, the TSA BM185’s electronics are mounted above the chamber for easy access. The touchscreen panel PC is mounted on an arm that allows for ease of movement while protecting the touchscreen.
Programmable Detection Parameters
With the ability for an administrator to define screening parameters, customizing the BM185 for specific radioactive isotopes or ‘waste streams’ is possible. The operator selects the proper waste stream from an annotated list for each item to be scanned making the BM285 flexible when screening for multiple contaminants.
Easy-to-Operate
Operation is simple using the color touchscreen panel PC. Easy to read graphics provide instant reporting of system status and operating mode. Administrators can generate reports for all activity or only alarmed activity for efficient record keeping on waste disposal.
Flexible Options
The BM185 comes standard with a stainless steel liner that protects the detectors and allows for easy cleaning if contaminated. An optional aluminum liner is available if greater sensitivity is required. With the optional sodium iodide detector, spectral isotopic identification to fit specific detection requirements is possible.
- High Sensitivity Waste Monitor for Medium-Sized Items
- Efficient, Accurate Analysis
- Touchscreen Operation
- Cost Effective
The TSA BM285 is designed to screen medium-sized items for radioactive emissions and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the BM285 waste monitor allows for cost effective waste management.
Advanced Design Features
The TSA BM285 high sensitivity and uniform measurement is achieved by using large volume plastic scintillator detectors on all six sides of the counting chamber for effective and accurate screening of all sides of the item. The load platform, containing the weight monitoring load cells, is mounted on sliding runners to facilitate easier loading of heavy samples. With lead shielding on all sides, the BM285 provides higher sensitivity and isolates the scanned item from any external radiation influence.
Programmable Detection Parameters
With the ability for an administrator to define screening parameters, customizing the TSA BM285 for specific radioactive isotopes or ‘waste streams’ is possible. The operator selects the proper waste stream from an annotated list for each item to be scanned, making the BM285 flexible when screening for multiple contaminants.
Easy-to-Operate
Operation is simple using the color touchscreen panel PC. Easy to read graphics provide instant reporting of system status and operating mode. Administrators can generate reports for all activity or only alarmed activity for efficient record keeping on waste disposal.
Flexible Options
With the optional scale the TSA BM285 is able to greater enhance facility operations. The BM285 comes standard with a stainless steel liner that protects the detectors and allows for easy cleaning if contaminated. An optional aluminum liner is available if greater sensitivity is required. With the optional sodium iodide detector, spectral isotopic identification to fit specific detection requirements is possible.
- High Sensitivity Waste Monitor for Large-sized Items
- Efficient, Accurate Analysis
- Touchscreen Operation
- Cost Effective Solution
The TSA BM286 is designed to screen items up to and including 55 gallon drums weighing up to 1,000 lbs for radioactive contamination and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the BM286 waste monitor allows for cost effective waste management.
Advanced Design Features
The TSA BM286 high sensitivity and uniform measurement is achieved by using large volume plastic scintillator detectors on all six sides of the counting chamber for effective and accurate screening of all sides of the item. The load platform, containing the weight monitoring load cells, is mounted on sliding runners to facilitate easier loading of heavy samples. With lead shielding on all sides, the BM286 provides higher sensitivity and isolates the scanned item from any external radiation influence.
Programmable Detection Parameters
With the ability for an administrator to define screening parameters, customizing the TSA BM286 for specific radioactive isotopes or ‘waste streams’ is possible. The operator selects the proper waste stream from an annotated list for each item to be scanned, making the BM286 flexible when screening for multiple contaminants.
Easy-to-Operate
Operation is simple using the color touchscreen panel PC. Easy to read graphics provide instant reporting of system status and operating mode. Administrators can generate reports for all activity or only alarmed activity for efficient record keeping on waste disposal.
Flexible Options
With the optional scale the TSA BM286 is able to greater enhance facility operations. The BM286 comes standard with a stainless steel liner that protects the detectors and allows for easy cleaning if contaminated. An optional aluminum liner is available if greater sensitivity is required. With the optional sodium iodide detector, spectral isotopic identification to fit specific detection requirements is possible.